Alloy Charts

Aluminum

  Common
Name		 Tenzaloy Almag
35		 356
Aluminum		 514
Aluminum		 319
Aluminum
  AA # 713 535 356 514 319
Chemical Compositions
Copper CU % 0.4 - 1.0 0.05 0.25 0.15 3.0 - 4.0
Silicon SI % 0.25 0.15 6.5 - 7.5 0.35 5.5 - 6.5
Magnesium Mg % 0.20 - 0.50 6.2 - 7.5 0.20 - 0.45 3.5 - 4.5 0.1
Zinc ZN % 7.0 - 8.0 0.0 0.35 0.15 1.0
Other Misc. Fe 1.1 Be .005 0.0 0.0 Fe 1.0
Characteristics (Scale is 1 - 5. 1 is the Highest)
Fluidity 3 5 1 4 2
Crack Resistance 4 4 1 4 2
Pressure Tightness 4 5 1 5 2
Strength at  High Temp. 4 3 3 3 3
Corrosion Resistance 3 1 2 1 3
Machinability Appearance 1 1 3 1 3
Anodizing Appearance 1 1 4 1 4
Polishing 1 1 4 1 4
Weldability 4 4 1 3 2
Mechanical Properties
Temper F or T5 F or T5 T6 F F
Ultimate Tensile (ksi) 32.0 35.0 30.0 22.0 23.0
Yield Strength (ksi) 22.0 18.0 20.0 9.0 13.0
Elongation % in 2 in. 3.0 9.0 3.0 6.0 1.5
Compressive Yield (ksi) - - 25.0 12.0 19.0
Brinell Hardness 500kg-10mm ball 60 - 90 60 - 90 55 - 90 35 - 65 55 - 85
Shearing Strength (ksi) - - 26.0 20.0 22.0
Endurance Limit (ksi) - - 8.5 7.0 10.0

 

Brass-Bronze

  Common
Name		 BC White
Bronze		 85, Red
Bronze		 Naval
Brass		 420, Mang.
Bronze		 415-9D, Alum.
Bronze		 SBS, Silicon
Brass
  CDA # - C83600 C85700 C86400 C95500 C87500
Chemical Compositions
Copper CU % Proprietary 84 - 86 58 - 64 56 - 62 78 79
Tin SN % Proprietary 4 - 6 0.5 - 1.5 0.5 - 1.5 0 0
Lead PB % Proprietary 4 - 6 0.8 - 1.5 0.5 - 1.5 0 0.5
Zinc ZN % Proprietary 4 - 6 32 - 40 34 - 42 0 12 - 16
Nickel NI % Proprietary 1.0 1.0 1.0 3 - 5.5 0
Iron FE % Proprietary 0.3 0.7 0.4 - 2.0 3 - 5 0
Aluminum AL % Proprietary 0.005 0.8 0.5 - 1.5 10 - 11.5 0.5
Silicon SI % Proprietary 0.005 0.05 0 0 3 - 5
Manganese Mn % Proprietary 0 0 0.1 - 1.5 3.5 0
Antimony Sb % Proprietary 0.25 0 0 0 0
Sulphur S % Proprietary 0.08 0 0 0 0
Phosphorus P % Proprietary 0.05 0 0 0 0
Mechanical Properties
Tensile  Minimum - 30 40 60 90 60
Strength (ksi) Typical 86.6 37 50 65 100 67
Yield  Minimum - 14 14 20 40 24
Strength (ksi) Typical 36.7 17 18 25 44 30
Elongation Minimum - 20 15 15 6 16
 (ksi) Typical 16% 30 40 20 12 21
Brinell Hardness 10mm-500kg Typ. - 60 75 105 195 115
Compression Strength PSI-.001" Set - 14 - 22 - 27
Impact Strength IZOD - ft-lbs - 10 - 30 13 -
Density LBS/Cu.In. - 0.318 0.304 0.301 0.272 0.299
Machinability Free Cut YB-100 - 84 80 65 50 50

Website and content ©2012 Bronze Craft Corporation, All rights reserved.